Lenoxx Electronics CR 777 User Manual

JUMBO DISPLAY  
DUAL ALARM CLOCK RADIO  
MODEL CR-777  
OPERATING INSTRUCTIONS  
DUAL ALARMS - PERFECT FOR WEEKDAYS  
& WEEKENDS  
EASY TO READ JUMBO CLOCK DISPLAY  
WAKE UP TO RADIO OR ALARM  
AM/FM RADIO RECEIVER  
ELECTRONIC DIGITAL CLOCK  
PM & DUAL ALARM INDICATORS  
SNOOZE FUNCTION(FOR EXTRA 7 MINUTES SLEEP)  
SLEEP TO RADIO (WITH AUTOMATIC SHUT OFF)  
BATTERY BACK-UP (9V BATTERY, NOT INCLUDED)  
PLEASE READ CAREFULLY BEFORE USE  
IB-CR777(NL)-WM-E-020504  
ADDITIONAL SAFETY INSTRUCTIONS  
1. Power Sources - The appliance should be connected to a power  
supply only of the type described in the operating instructions or  
as marked on the appliance.  
2. Wall or Ceiling Mounting - The appliance should not be mounted  
to a wall or ceiling.  
3. Object and Liquid Entry - Care should be taken so that objects  
do not fall and liquids are not spilled into the enclosure through  
openings.  
4. Servicing - The user should not attempt to service the appliance  
beyond that described in the operating instructions. All other  
servicing should be referred to qualified service personnel.  
5. Do not connect FM antenna wire to any outdoor antenna.  
LOCATION OF CONTROLS  
FRONT VIEW  
ALARM SET  
ALARM 1  
INDICATOR  
SWITCH  
TUNING  
CONTROL  
(1, 2 or 1+2)  
CLOCK DISPLAY DIAL SCALE  
DIMMER  
SWITCH  
ALARM 2 INDICATOR  
PM INDICATOR  
VOLUME  
CONTROL  
TOP VIEW  
SNOOZE  
BUTTON  
FUNCTION SWITCH  
(BUZZ/AUTO/OFF/ON)  
BAND  
SWITCH  
FORWARD  
BUTTON  
SLEEP  
BUTTON  
TIME SET  
BUTTON  
ALARM/SLEEP  
OFF BUTTON  
REVERSE  
BUTTON  
ALARM  
BUTTON  
IB-CR777(NL)-WM-E-020504  
2
LOCATION OF CONTROLS  
BACK VIEW  
BATTERY  
COMPARTMENT  
(9V, for back up)  
FM ANTENNA WIRE  
AC POWER CORD  
(unwind for best reception)  
OPERATING INSTRUCTIONS  
Powering Up  
Plug the AC power cord into a 120V, 60Hz electrical outlet. The clock  
display will light up and flash indicating the power is on.  
NOTE: This cord is polarized. This means the cord will only fit one  
way into the socket or wall outlet. If it does not fit, do not force  
it, just reverse it and try again.  
BATTERY BACK-UP  
If the AC cord is disconnected or if there is a short time power failure,  
this electronic clock and timer are designed to continue operating  
internally (without showing the time in the display) if a 9 volt battery (not  
included) is installed.  
The radio will work fine without this backup battery.  
NOTE: You may check the condition of the battery every few months  
by disconnecting the AC cord and connecting it again 2 or 3  
minutes later. The preset times will show. If the time flashes, it  
indicates the battery is dead or not connected properly.  
Setting the Clock  
1. Press and hold the TIME set button together with the FORWARD  
button until the display shows the desired hour.  
2. Press and hold the TIME set button together with the REVERSE button  
until the display shows the desired minutes.  
NOTE: When the PM indicator is off, the time is AM.  
3
OPERATING INSTRUCTIONS  
Setting the Alarm Times  
This set has dual alarms. You may set ALARM 1 to wake you at a certain  
time, or ALARM 2 to wake you at a different time, or ALARM 1+2 - both  
alarms will sound at the times you set.  
This feature is useful for a husband & wife waking up at different times  
or a single person who likes to wake up at different times during week  
days or weekends.  
To set ALARM 1, slide the ALARM SET switch to position 1.  
To set ALARM 2, slide the ALARM SET switch to position 2.  
1. Use the ALARM button to check the alarm time.  
2. Press and hold the ALARM button together with the FORWARD button  
until the display shows the desired alarm hour time.  
3. Press and hold the ALARM button together with the REVERSE button  
until the display shows the correct alarm minutes.  
4. Make sure the PM lamp is off if you want the clock to wake you in the  
morning.  
5. Release the ALARM button, the clock display will show the normal  
time of day. Press the alarm button to display the alarm time.  
NOTE 1:Again check the PM indicator. If you want the radio to  
wake you in the morning, the lamp above to PM should  
be off on alarm time (when pressing ALARM button). To change  
PM to AM time, advance time 12 hours.  
NOTE 2: To wake to ALARM 1 time, slide ALARM SET switch to position 1.  
To wake to ALARM 2 time, slide ALARM SET switch to position 2.  
To wake to both times, slide ALARM SET switch to position 1+2.  
Playing the Radio  
1. Slide the FUNCTION switch to ON position.  
2. Slide the BAND switch to either AM or FM.  
3. Turn the TUNING control to your desired station.  
4. Adjust the VOLUME control to your favorite listening level.  
5. Slide the FUNCTION switch to OFF position to shut off the radio.  
GETTING BETTER RADIO RECEPTION:  
For best AM reception, rotate the radio a small amount or position it  
near the window.  
For best FM reception, unwrap and fully extend the FM antenna wire.  
WARNING: Do not connect the FM antenna to an outdoor antenna.  
Waking up to Radio (Alarm)  
1. Set the alarm time as previously instructed and slide the ALARM  
SET button to ALARM 1, ALARM 2 or ALARM 1+2.  
2. Select your desired AM or FM broadcast by following the procedure  
of Playing the Radio.  
3. Make sure the VOLUME control is set loud enough to wake you up.  
4. Slide the FUNCTION switch to AUTO position and the ALARM 1,  
or ALARM 2 or both indicators will light up (depending on what you  
select on step 1).  
NOTE: Your set is now ready to turn on automatically at your  
selected alarm time(s).  
5. When alarm sounds, to get 7 minutes of extra sleep, press the  
SNOOZE button.  
6. To shut off the alarm, press ALARM/SLEEP OFF button.  
IB-CR777(NL)-WM-E-020504  
4
OPERATING INSTRUCTIONS  
Waking up to Buzzer (Alarm)  
1. Set the alarm time as previously instructed and slide the ALARM  
SET button to ALARM 1, ALARM 2 or ALARM 1+2.  
2. Slide the FUNCTION switch to BUZZ position and the ALARM 1,  
or ALARM 2 or both indicators will light up (depending on what you  
select on step 1).  
3. The buzzer alarm is now set to turn on automatically at the  
selected alarm time(s).  
4. When buzzer sounds, to get 7 minutes of extra sleep, press the  
SNOOZE button.  
5. To shut off the alarm, press ALARM/SLEEP OFF button.  
Snooze Control  
When this set has waken you up and you wish to sleep a few minutes  
more, simply press the SNOOZE button. The radio or buzzer will go off  
for 7 minutes and then come on again. This is repeated in a row.  
Alarm Off  
1. Press ALARM/SLEEP OFF button. This will shut the alarm for that  
day only. Next day the set will wake you again at the same time.  
2. Slide the FUNCTION switch to OFF position and the alarm function  
is off until you re-adjust the FUNCTION switch to AUTO or BUZZ.  
Sleep Control  
The SLEEP control will allow the radio to play 59 minutes before the  
radio turns itself off.  
1. Slide the FUNCTION switch to BUZZ or AUTO position.  
2. Press the SLEEP button, the display will show 59 minutes  
and the radio will start to play.  
3. Press the SLEEP button down together with the FORWARD or  
REVERSE button until the display shows your desired amount of  
time you want the radio to play before shutting itself off.  
4. Release both buttons. The radio will play for the time you selected  
and shut itself off.  
5. To turn the radio off before the playing time has expired, simply press  
the ALARM/SLEEP OFF button.  
NOTE: The sleep function will not affect the wake-up operation of the  
clock if the FUNCTION switch is in AUTO or BUZZ position.  
In the morning, the radio or buzzer will wake you up if FUNCTION  
switch is in the AUTO or BUZZ position.  
Display Dimmer  
The clock display has 2 settings: HIGH and LOW. Slide the switch to  
adjust the brightness of the display.  
IB-CR777(NL)-WM-E-020504  
5
TROUBLE SHOOTING  
(Helpful Hints)  
SHOULD YOUR SET EXHIBIT A PROBLEM, CHECK THE  
FOLLOWING BEFORE SEEKING SERVICE.  
SYMPTOM  
CAUSE  
SOLUTION  
AM or PM not set  
correctly. Is alarm  
time set in AM range  
(PM Lamp off)?  
Advance the clock 12  
hours.  
FUNCTION switch is  
in OFF position.  
Set the FUNCTION  
switch to AUTO or BUZZ  
position.  
Alarm does not  
come on in the  
morning.  
Are the ALARM  
INDICATORS off?  
Recheck the ALARM 1 &  
ALARM 2 times, and make  
sure the proper ALARM  
indicator is turn on.  
ALARM SET switch is  
not in the proper  
position.  
FM antenna wire  
is not extended.  
Extend FM antenna  
wire.  
FM is distorted  
and weak.  
Station not tuned in  
properly.  
Tune to desired  
station carefully.  
Turn to a stronger  
station.  
Weak broadcast  
station.  
Rotate the set to receive  
better signal.  
Signal is blocked.  
Noise or weak  
sound on AM  
broadcast.  
Turn the radio for better  
AM reception or bring set  
near a window.  
External  
interference.  
Slide the FUNCTION  
switch to ON position.  
FUNCTION switch is  
in the OFF position.  
Radio no  
sound.  
VOLUME control set Rotate VOLUME control  
to minimum position. for desired sound.  
Set the clock and alarm  
The clock is not set.  
time.  
The clock is  
flashing.  
A power failure has  
occurred.  
Reset the clock alarm time  
and time of the day.  
Connect sets AC cord  
and make sure outlet has  
power.  
The sets AC cord is  
Clock is dead.  
not connected.  
LENOXX reserves the right to make design and specification changes  
for product improvement.  
PROTECT YOUR FINE FURNITURE!  
WE RECOMMEND  
A
CLOTH OR OTHER PROTECTIVE  
MATERIAL BE PLACED UNDER THE SET WHEN PLACING IT  
ON SURFACE WITH A NATURAL OR LACQUER FINISH.  
IB-CR777(NL)-WM-E-020504  
6
SPECIFICATIONS  
Power source:  
AC 120V, 60Hz, 8W  
DC 9V battery for backup time memory  
(optional, alkaline battery is recommended)  
Dimensions:  
9" (Length)  
4 1/4" (High)  
2 3/4" (Depth)  
Frequency range: FM 88 - 108MHz  
AM 530 - 1700kHz  
LIMITED WARRANTY  
We warrant this product to be free from defects in material  
and workmanship under normal use for a period of 90 days  
after purchase and we will repair it free of charge or replace  
it at no charge, should it become defective under this  
warranty, providing you submit proof of purchase (sales slip)  
with the set.  
During the initial 90 day period after original purchase, we will  
service or exchange, at no charge, the set that is returned to  
LENOXX ELECTRONICS CORP. After the initial 90 day period  
expires, and for a period of 12 months from original purchase, we  
will repair the unit covering any part(s) that need to be replaced at  
no charge, but will charge for the cost of labor, return postage paid  
by LENOXX.  
This warranty does not apply to any products which have been  
subject to misuse, neglect or accident. This warranty does  
not cover broken cords or cabinet. UNDER NO  
CIRCUMSTANCES WILL LENOXX ELECTRONICS CORP. BE  
LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL  
DAMAGES. Some states do not allow the exclusion or  
limitation of incidental or consequential damages, so the  
above limitations or exclusions may not apply to you.  
This warranty gives you specific legal rights, and you may also  
have other rights which vary from state to state. The following  
charges apply to repairs beyond the warranty period: $5.00. Be  
sure to pack carefully and return postage paid insured together with  
your money order (personal checks will not be accepted) and sales  
receipt to :  
LENOXX ELECTRONICS CORP.  
2 GERMAK DRIVE, CARTERET N.J. 07008  
For customer service  
Dial 1-800-315-5885  
(MONDAY - THURSDAY 9:00 AM - 5:00 PM, FRIDAY 9:00 AM - 1:00 PM EST)  
or Visit Our Website: http://www.lenoxx.com  
© 2003 LENOXX ELECTRONICS CORP.  
2 GERMAK DRIVE  
CARTERET, N.J. 07008  
MADE & PRINTED IN CHINA  
IB-CR777(NL)-WM-E-020504  
7

Nokia 5070 User Manual
Maxtor DIAMONDMAX 21 PATA STM3250620A User Manual
Korg UPGRADE GUIDE D16XD User Manual
Kenwood KDC X715 User Manual
Kenwood KDC 5024 User Manual
Fujitsu Computer Drive MPC3032AT User Manual
Curtis CR4966 User Manual
Cuisinart DGB 600 User Manual
Breville 800ES User Manual
Bloomfield 8543 User Manual